UNCOMPROMISINGSTRENGTH.
Manufactures innovative, cost-effective alternatives to conventional pipe, duct, and tray supports.
ENGINEERED
TO HOLD.
- →Durable materials — extended service life
- →Modular designs for future scalability
- →Vibration dampening on all clamp variants
- →Suitable for indoor and outdoor use
Technical Specs
Comprehensive range of support and fastening solutions for industrial, commercial, and residential applications.
Product Catalogue
Anchor Fastener
Standard zinc-plated masonry anchor for securing pipe support brackets and hangers to concrete and brick walls.
- MATERIALSCarbon steel, Zinc-plated
- VARIANTS2 sizes
- FEATURESHigh holding power, Concrete & masonry, Two size options
Anchor Hook
Eye-bolt style anchor with hook end for attaching pipe hanger rods and rigging directly into concrete ceilings or walls.
- MATERIALSCarbon steel, Brass-finish zinc plating
- VARIANTS4 graduated sizes
- FEATURESHook/eye attachment point, Expansion sleeve base, Ceiling & wall mounting
Angle Support
Slotted angle bracket welded to a base plate for anchoring vertical strut and framing runs to floors or structures.
- MATERIALSGalvanized steel
- FEATURESSlotted for adjustability, Floor/structure mounting, Rigid vertical support
Beam Clamp
G-clamp style beam clamp that grips an I-beam flange without drilling, providing a threaded mounting point for hangers.
- MATERIALSZinc-plated steel
- FEATURESNo-drill beam attachment, Threaded stud mounting point, Adjustable jaw
Beam Clamp Assembly
Complete beam clamp with integrated threaded hanger rod for suspending pipework directly beneath structural beams.
- MATERIALSZinc-plated steel
- FEATURESPre-assembled kit, Adjustable suspension rod, Flange-gripping jaw
Beam Claw
Quick-fit claw bracket that hooks over a beam flange and bolts tight, providing a drill-free structural attachment point.
- MATERIALSGalvanized steel
- FEATURESHook-and-bolt fixing, No drilling required, Mounting hole for accessories
Bolt, Nut & Washer Set
Hex bolt, nut, and washer sets in multiple lengths for general-purpose fastening of clamps and brackets to structural steel.
- MATERIALSZinc-plated steel
- VARIANTSShort, Long
- FEATURESHex head bolts, Matched washer & nut, Multiple lengths
Bombay & SS Nails
Bombay and stainless-finish nails in assorted lengths for fastening brackets, clips, and clamps to masonry or timber.
- MATERIALSCarbon steel, Stainless finish
- VARIANTS2 length families
- FEATURESDomed heads, Fluted shank, Masonry & timber use
Cantilever Support
Offset support bracket providing a load-bearing arm for projecting pipe or cable-tray runs out from a wall or structure.
- MATERIALSGalvanized steel
- FEATURESSlotted splayed arms, Pentagon base plate, Wall-offset mounting
Long Nut (Connector)
Hexagonal coupling nut for joining two threaded rods or extending bolt length in pipe support assemblies.
- MATERIALSMild steel, Galvanized steel
- VARIANTSM8, M10, M12, M16
- FEATURESFull thread engagement, High tensile strength, Rod coupling
Drop-In Anchor
Internal expansion anchor dropped into pre-drilled concrete holes for flush, high-strength fixing.
- MATERIALSCarbon steel, Zinc-plated
- VARIANTSM8, M10, M12
- FEATURESFlush fit with surface, High pull-out strength, Expansion in hole
Clevis Hanger
Galvanized clevis loop hanger for suspending pipes from threaded rod with pin-secured angular adjustment.
- MATERIALSGalvanized steel
- VARIANTS½" to 8"
- FEATURESRod-suspension mounting, Pin-secured yoke, Angular self-alignment
Clevis Hanger (EPDM Lined)
Clevis hanger with EPDM rubber lining to protect pipe surface and dampen vibration during suspension.
- MATERIALSGalvanized steel, EPDM rubber
- FEATURESRubber-lined contact, Vibration dampening, Rod-suspension mounting
I-Beam Support Bracket Set
Beam-mount support bracket set combining an offset step bracket and a triangular clamp-foot design for attaching supports to structural I-beams without drilling.
- MATERIALSGalvanized steel
- VARIANTS2 bracket profiles
- FEATURESNo drilling to beam, Beam-clamp attachment, Two bracket profiles
L Bracket
Slotted stainless-steel L-shaped angle bracket for joining and reinforcing perpendicular structural or strut-channel members.
- MATERIALSStainless steel
- FEATURESSlotted for adjustability, 90° angle joint, Corrosion resistant
Nut and Washer Set
Hex nuts and matching flat washers in graduated sizes for securing threaded rod and bolted clamp assemblies.
- MATERIALSMild steel, Zinc-plated
- VARIANTS4 graduated sizes
- FEATURESMatched nut & washer pairs, Graduated sizing, General fastening use
Pin Type Anchor Fastener
Drive-pin anchor for rapid concrete and masonry fastening without pre-drilling a large bore.
- MATERIALSHardened carbon steel
- FEATURESHammer-drive installation, Fast fixing, Flanged nut included
Powder Coated Bracket
Slotted support bracket with powder-coated finish offering corrosion resistance and a clean appearance for visible pipe or cable-tray mounting.
- MATERIALSMild steel, Powder-coated
- FEATURESCorrosion-resistant finish, Slotted top rail, Flared mounting feet
Purlin Clamp
Rubber-lined clamp for securely fastening pipework or brackets to a roof purlin without piercing the flange.
- MATERIALSGalvanized steel, EPDM rubber pad
- FEATURESNo-pierce purlin fixing, Rubber-lined jaw, Stepped jaw design
Saddle Clamp (GI)
Pipe saddle clamp in galvanized-iron finish for securing round pipework to walls, ceilings, or racking.
- MATERIALSGalvanized iron
- VARIANTS5 graduated diameters
- FEATURESFull-loop saddle design, Mounting ear, Multiple diameters
Saddle Clamp (Powder Coated)
Pipe saddle clamp with a powder-coated finish for a durable, finished look on visible pipe runs.
- MATERIALSSteel, Powder-coated
- VARIANTS5 graduated diameters
- FEATURESDurable finished coating, Full-loop saddle design, Multiple diameters
Slotted Channels
Range of slotted steel strut-channel profiles used as the backbone framework for building custom pipe-support assemblies.
- MATERIALSGalvanized steel
- VARIANTS3 channel profiles
- FEATURESMultiple channel profiles, Continuous slotting, Modular framework
Slotted Rails
Perforated slotted steel channel rails for flexible mounting of brackets, clamps, and pipe support equipment.
- MATERIALSGalvanized steel, Stainless steel
- FEATURESContinuous adjustability, High load capacity, Modular system
Split Clamp
Two-piece hinged rubber-lined clamp for pipe support allowing installation without disturbing existing piping.
- MATERIALSCast iron, EPDM rubber lining
- FEATURESNo pipe removal needed, Hinged two-piece body, Secure bolt locking
Spring Support
Spring-loaded pipe hanger allowing vertical movement from thermal expansion while maintaining constant support load.
- MATERIALSCarbon steel spring, Galvanized housing
- FEATURESVibration isolation, Thermal movement compensation, Constant load support
Table Tray
Perforated cable/pipe tray for organizing and supporting multiple pipe or cable runs along a structural span.
- MATERIALSGalvanized steel
- FEATURESPerforated base for airflow, Turned-up side rails, Long span sections
Terrace Mounting Stand
A-frame stand-off bracket for elevating and anchoring pipework or structural framing above a flat roof surface.
- MATERIALSGalvanized steel
- FEATURESA-frame stability, Square base plate, Rooftop / terrace use
Threaded Rod
Fully threaded steel rod for hanging pipe supports from ceiling structures at custom heights.
- MATERIALSMS, Galvanized, Stainless steel
- VARIANTSM8, M10, M12, M16 — up to 3m length
- FEATURESCustom cut to length, Standard metric thread, Ceiling suspension
Turnbuckle Clamp
Screw-adjustable turnbuckle for tensioning and fine-tuning the fit of pipe-support rigging and rod runs.
- MATERIALSChrome-plated steel
- FEATURESTension adjustment screw, Hooked end fittings, Rigging & rod tensioning
U-Bolt Set (Assorted)
Assorted round and square U-bolts pre-assembled with washers and nuts for securing pipes to varied structural profiles.
- MATERIALSZinc-plated steel
- FEATURESRound & square profiles, Pre-assembled hardware, Multiple mounting styles
U-Bolt (EPDM Lined)
EPDM rubber-coated U-bolts that cushion and grip pipe while preventing metal-on-metal contact when clamping to beams or racks.
- MATERIALSGalvanized steel, EPDM rubber
- VARIANTS2 graduated sizes
- FEATURESRubber-cushioned bend, Corrosion protection, Beam & rack mounting
U-Bolts
U-shaped fastening bolts for securing pipes to beams, walls, and structural supports.
- MATERIALSGalvanized steel, Stainless steel, MS
- VARIANTS9 graduated diameters
- FEATURESSnug pipe grip, Available with nuts and washers, Industrial grade
Unistrut Channel
Slotted steel channel, the modular building block for bolt-together pipe supports, racking, and equipment mounting.
- MATERIALSGalvanized steel
- FEATURESContinuous slotting, Modular & reusable, Cut to length
Universal Clamp
General-purpose wire loop pipe clamp with multiple mounting tabs for a wide range of pipe diameters and installation conditions.
- MATERIALSMS, Galvanized
- FEATURESMulti-size compatibility, Multiple mounting tabs, Quick install
Wall Bracket Pipe Moulding Assembly
Complete wall-mounting bracket set with pipe moulding for clean surface-mounted pipe runs.
- MATERIALSMS, Galvanized
- FEATURESPre-assembled kit, Surface-mounted installation, Clean finish
Wall Bracket
Standard L-shaped cantilever bracket for supporting pipes horizontally from walls.
- MATERIALSMS, Hot-dip galvanized
- VARIANTS100mm to 600mm projection
- FEATURESHeavy-duty load bearing, Bolt-on installation, Adjustable projection
Wall Mounting Clamp
Two-piece pipe clamp for securing round pipe directly to a wall or vertical surface.
- MATERIALSGalvanized steel
- FEATURESWavy-jaw pipe grip, Bolt-secured closure, Direct wall mounting
Wedge Anchor Fastener
Wedge-style expansion anchor for securing pipe support brackets and hangers into concrete with high pull-out resistance.
- MATERIALSCarbon steel, Zinc-plated
- VARIANTS4 graduated sizes
- FEATURESHigh pull-out resistance, Expansion wedge design, Washer & nut included
Operational Advantages
ISO-9001 VerifiedModern, cost-effective alternatives to traditional supports designed for optimal performance.
No special tools or experience needed—cut down installation time and labor costs.
Built-in adjustability allows smooth alignment with uneven ceilings and walls.
Supports pipe sizes from 1/2" to 16" and all material types including GI, CI, PVC, and more.
Powder-coated finishes available on request for added durability and visual appeal.
Pre-engineered, ready-made supports to simplify your project timelines.